DX-2900 2D X-ray diffractometer
Horizontal 2D X-ray diffractometer
2Dl X-ray diffractometer can quickly realize the study of structural orientation, texture and crystal state of organic and inorganic materials. It is applied to the surface structure test of membrane, fiber, filamentous material and block material.
DX-2900 is composed of capillary micro-focus source, two-axis thin film sample holder, 2D array detector and control software. It can also be configured with film sample holder, transmission sample holder, inert gas protection holder and in-situ atmosphere treatment holder to meet the needs of various measurement purposes.
Lead iodide film 2D diffraction spectrogram of polymer sample
Methylamine lead iodide perovskite film Transmission XRD of polybutene spline
N2200 Polymer film
Vertical 2Dl X-ray diffractometer
Multiple samples can be placed horizontally and liquid, molten and other special samples can be measured;
With heating sample holder: samples can be heated when measuring;
150mm × 150mm XY position holder: can provide greater range of movement.
Vertical 2Dl X-ray diffractometer
150mm × 150mm XY position holder Heating sample holder
| ||
2D diffraction spectrogram of Al2O3 | 2D diffraction spectrogram of polyethylene | 2D diffraction spectrogram of polybutadiene |
Technical parameter
1. X-ray generator: Cu or Mo target, 50W (50kV, 1mA)；
2. Capillary: collimation 0.25°, focal spot diameter 0.5mm, intensity>10^8ph/s;
3. Two-axis film sample holder: Omega axis: - 10°~10°, accuracy 0.002°; Z-axis: 0-15mm, accuracy 0.002mm;
4. 2D array detector: 512 × 512 pixels, 75μm/pixel;
5. Optional: transmission sample holder, in-situ film heat holder, in-situ solvent atmosphere treatment accessory, atmosphere protection accessory, etc；
6. Film sample holder can be upgraded to three-axis or five-axis film sample holder, and 2D array detector can be upgraded to Pilatus200K and Eiger500K/1M.
